From: MADMAN (dmadlan@xxxxxxxxx)
Date: Mon Mar 04 2002 - 16:27:43 GMT-3
Looks like you may have a card that is in diagnostic mode. I had a
6500 sup card that came up with a funky prompt like your seeing, MARINA,
and I had to get it RMAed. Any Cisco guys out there recognize MARINA as
the L3 card code name???
Dave
David wrote:
>
> I'm having issues setting up Cat 4K with L3 module.
> This are the modules:
> Switching Supervisor - WS-X4012
> Router Switch Card - WS-X4232-L3
>
> L3 module did not seem to have IOS so I ran Xmodem to
> put cat4232-in-mz.120-18.W5.22a.bin IOS file on. That
> seem to go OK but when resstarted the box, I got the
> output below. Any ideas what's going on i.e. why no
> CLI is present??
>
> Compiled Fri 09-Jun-00 10:17 by wkassa
> Diagnostic Software (MARINA-DIAG), Version 1.4(1)
> [wkassa j_conn]
>
> Copyright (c) Cisco Systems Inc. 1998-1999
>
> MARINA>1%
> ROMMON: Entered init
> ROMMON: Cold Reset frame @0x00000000
> ROMMON: Reading reset reason register
> ROMMON: Valid NVRAM config
>
> System Bootstrap, Version 12.0(7)W5(15b) RELEASE
> SOFTWARE
> Copyright (c) 2000 by cisco Systems, Inc.
>
> ROMMON: Initializing exceptions
> ROMMON: Initializing TLB
> ROMMON: Initializing cache
> ROMMON: Sizing and zeroing main memory ... 64 MBytes
> ROMMON: Sizing non-volatile memory ... 128 KBytes
> ROMMON: Exiting init
>
> Catalyst-4232 platform with 65536 Kbytes of main
> memory
>
> Initialize MMC diag test driver
> Marina system recognized.
> NP54 0, XPIF Ver.1 Port 0 at 1244 M
> NP54 0, XPIF Ver.1 Port 1 at 1244 M
> NP54 2, XPIF Ver.1 Port 0 at 1244 M
> NP54 2, XPIF Ver.1 Port 1 at 1244 M
> ****** Spawn status register polling task ******
> fpga_ucode begin from 0x8019fe28
> FPGA_DNLD completed
> Thermostat #0: config reg reads 0x0a
> Thermostat #1: config reg reads 0xff
>
> Booting on Dec 31 1999 23:59:59
>
> Compiled Fri 09-Jun-00 10:17 by wkassa
> Diagnostic Software (MARINA-DIAG), Version 1.4(1)
> [wkassa j_conn]
>
> Copyright (c) Cisco Systems Inc. 1998-1999
>
> MARINA>1%
> ROMMON: Entered init
> ROMMON: Cold Reset frame @0x00000000
> ROMMON: Reading reset reason register
> ROMMON: Valid NVRAM config
>
> System Bootstrap, Version 12.0(7)W5(15b) RELEASE
> SOFTWARE
> Copyright (c) 2000 by cisco Systems, Inc.
>
> ROMMON: Initializing exceptions
> ROMMON: Initializing TLB
> ROMMON: Initializing cache
> ROMMON: Sizing and zeroing main memory ... 64 MBytes
> ROMMON: Sizing non-volatile memory ... 128 KBytes
> ROMMON: Exiting init
>
> Catalyst-4232 platform with 65536 Kbytes of main
> memory
>
> Initialize MMC diag test driver
> Marina system recognized.
> NP54 0, XPIF Ver.1 Port 0 at 1244 M
> NP54 0, XPIF Ver.1 Port 1 at 1244 M
> NP54 2, XPIF Ver.1 Port 0 at 1244 M
> NP54 2, XPIF Ver.1 Port 1 at 1244 M
> ****** Spawn status register polling task ******
> fpga_ucode begin from 0x8019fe28
> FPGA_DNLD completed
> Thermostat #0: config reg reads 0x0a
> Thermostat #1: config reg reads 0xff
>
> Booting on Dec 31 1999 23:59:59
>
> Compiled Fri 09-Jun-00 10:17 by wkassa
> Diagnostic Software (MARINA-DIAG), Version 1.4(1)
> [wkassa j_conn]
>
> Copyright (c) Cisco Systems Inc. 1998-1999
>
> MARINA>1%
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:52 GMT-3