From: Michael C. Popovich (mpopovich@xxxxxxxxxx)
Date: Mon Feb 18 2002 - 13:20:20 GMT-3
Interface serial.1 multipoint
Frame-relay interface-dlci 131
Frame-relay class simple1
Frame-relay interface-dlci 166
Frame-relay class simple2
It believe this is how it would work?
MP
-----Original Message-----
From: Ludwig Morales [mailto:morales_l@hotmail.com]
Sent: Monday, February 18, 2002 9:50 AM
To: ccielab@groupstudy.com
Subject: FRTS
When configuring frame relay traffic shaping and using a Multipoint =
interface on the spoke, if I configure a class on that sub it applies =
to all spokes
ej.
interface Serial.1 multipoint
ip address 128.10.10.6 255.255.255.248
no ip directed-broadcast
frame-relay map ip 128.10.10.1 131 broadcast
frame-relay map ip 128.10.10.5 166 broadcast
frame-relay class simple
=20
in this configurations both pvc would get the same traffic shaping, now
=
I want to use 1 multipoint subinterface but using different classes to =
each pvc, how do I do it? can this be done?
Thanks
[GroupStudy.com removed an attachment of type text/x-vcard which had a
name of Ludwig A. Morales.vcf]
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:26 GMT-3