FRTS

From: Ludwig Morales (morales_l@xxxxxxxxxxx)
Date: Mon Feb 18 2002 - 12:50:01 GMT-3

• Next message: Erick B.: "Re: Redistribute OSPF LSA"
• Previous message: Annu Roopa: "Re: distribute-list ( Nth time)"
• Next in thread: kym blair: "Re: FRTS"
• Maybe reply: kym blair: "Re: FRTS"
• Maybe reply: Michael C. Popovich: "RE: FRTS"
• Maybe reply: Michael C. Popovich: "RE: FRTS"
• Maybe reply: Williams, Glenn: "RE: FRTS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
When configuring frame relay traffic shaping and using a Multipoint =
interface on the spoke, if I configure a class on that sub it applies =
to all spokes
ej.

interface Serial.1 multipoint
 ip address 128.10.10.6 255.255.255.248
 no ip directed-broadcast
 frame-relay map ip 128.10.10.1 131 broadcast
 frame-relay map ip 128.10.10.5 166 broadcast
 frame-relay class simple
=20
in this configurations both pvc would get the same traffic shaping, now =
I want to use 1 multipoint subinterface but using different classes to =
each pvc, how do I do it? can this be done?

Thanks

[GroupStudy.com removed an attachment of type text/x-vcard which had a name of
Ludwig A. Morales.vcf]

• Next message: Erick B.: "Re: Redistribute OSPF LSA"
• Previous message: Annu Roopa: "Re: distribute-list ( Nth time)"
• Next in thread: kym blair: "Re: FRTS"
• Maybe reply: kym blair: "Re: FRTS"
• Maybe reply: Michael C. Popovich: "RE: FRTS"
• Maybe reply: Michael C. Popovich: "RE: FRTS"
• Maybe reply: Williams, Glenn: "RE: FRTS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:26 GMT-3