From: Ludwig Morales (morales_l@xxxxxxxxxxx)
Date: Mon Feb 18 2002 - 13:09:51 GMT-3
Correction:
Muy statement is:
When configuring frame relay traffic shaping and using a Multipoint =
interface on the HUB, if I configure a class on that sub it applies =
to all spokes
.....
----- Original Message -----
> From: "Ludwig Morales" <morales_l@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, February 18, 2002 11:50 AM
> Subject: FRTS
>
>
> > When configuring frame relay traffic shaping and using a Multipoint =
> > interface on the spoke, if I configure a class on that sub it applies =
> > to all spokes
> > ej.
> >
> > interface Serial.1 multipoint
> > ip address 128.10.10.6 255.255.255.248
> > no ip directed-broadcast
> > frame-relay map ip 128.10.10.1 131 broadcast
> > frame-relay map ip 128.10.10.5 166 broadcast
> > frame-relay class simple
> > =20
> > in this configurations both pvc would get the same traffic shaping, now
=
> > I want to use 1 multipoint subinterface but using different classes to =
> > each pvc, how do I do it? can this be done?
> >
> > Thanks
> >
> > [GroupStudy.com removed an attachment of type text/x-vcard which had a
> name of Ludwig A. Morales.vcf]
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:26 GMT-3