From: Paul Jin (pauljin@xxxxxxxxx)
Date: Mon Feb 04 2002 - 22:32:28 GMT-3
Hey, I will check it out later and let you guys know.
This saves me a trip to the stratacom lab at work where I have to bribe someone
to get in.
- Paul
Jaeheon Yoo <kghost@chollian.net> wrote: Yes, it was.
But F/R traffic policing features on Cisco routers are newly introduced in 12.1
(2)T.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_r/
frcmds/wrffr3.htm#xtocid15
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_c/
wcffrely.htm#xtocid27
(watch the word wrap)
If F/R traffic policing is enabled, I believe you can check some of DE bit sett
ing statistics on THE OTHER END DTE(router) by "show frame pvc" command.
Sorry, I didn't check it myself yet.
Hope this helps,
Jaeheon
----- Original Message -----
From: "Paul Jin"
To: "John Neiberger" ; "Landon Fitts" ;
Sent: Tuesday, February 05, 2002 9:16 AM
Subject: Re: FRTS Verification
>
> The router does the best in can do take the place of a frame relay switch but
it cannot do everything.
>
> To recieve fecn/becn, you must setup additional parameters on the switch. For
example, Peak rate, CIR, different queues
> and at what point the fecn/becn will be triggered, etc... The router does not
have that capability. At least not that i know of.
>
> When we configure the router as a frame switch, all we really told it to do i
s configure dlci number at each port and which
> way it should be routed out. It is missing everything else a normal frame swi
tch will give them.
>
> - Paul
>
>
>
>
>
>
> John Neiberger wrote: I'm not positive about this, but I don't think that Cis
co
> routers support FECNs/BECNs when configured as frame relay
> switches. I can't remember why I think this, it just seems
> like I read it somewhere.
>
> John
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:11 GMT-3