From: Paul Jin (pauljin@xxxxxxxxx)
Date: Tue Feb 05 2002 - 00:20:24 GMT-3
Looks like the 4000 12.1Ts are not avail for download anymore.
It looks like I will have to use 12.2 on a 4500.
I will try to use the routers at the office later and test it out.
Thanks for the link. It will be useful.
Paul
Jaeheon Yoo <kghost@chollian.net> wrote: I guess this link will help you much
better.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/1
21t2/dtfrswen.htm
Jaeheon
----- Original Message -----
From: "Paul Jin"
To: "John Neiberger" ; "Landon Fitts" ;
Sent: Tuesday, February 05, 2002 9:16 AM
Subject: Re: FRTS Verification
>
> The router does the best in can do take the place of a frame relay switch but
it cannot do everything.
>
> To recieve fecn/becn, you must setup additional parameters on the switch. For
example, Peak rate, CIR, different queues
> and at what point the fecn/becn will be triggered, etc... The router does not
have that capability. At least not that i know of.
>
> When we configure the router as a frame switch, all we really told it to do i
s configure dlci number at each port and which
> way it should be routed out. It is missing everything else a normal frame swi
tch will give them.
>
> - Paul
>
>
>
>
>
>
> John Neiberger wrote: I'm not positive about this, but I don't think that Cis
co
> routers support FECNs/BECNs when configured as frame relay
> switches. I can't remember why I think this, it just seems
> like I read it somewhere.
>
> John
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:11 GMT-3