From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Tue Feb 05 2002 - 12:25:09 GMT-3
to test it u have to do some additional commands for CIR and MinCIR and Bc
.... if the link it of 1.5mb then lower the CIR to 1000k then u can see the
delay fields in "sh frame pvc xxx
-Mamoor
----- Original Message -----
From: Landon Fitts <l.fitts@mindspring.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, February 05, 2002 4:45 AM
Subject: FRTS Verification
> If using a 2520 as a frame-relay switch, how would you get FECNs or BECNs
> to be sent to the transmitting or recieving router? I set up a ptp PVC,
and
> configured FRTS at both ends. I did an FTP on a 10Meg file using the ptp
> PVC to see if I could get any FECNs or BECNs at either end, but didn't see
> anything. Do you have to enable anything in the form of
> FRTS on the 2520, to enable FECNs or BECNs?
>
> Landon Fitts,
> NNCSE, NNCDE, CCNP, CCDP, CCIE Lab Candidate
> l.fitts@mindspring.com
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:12 GMT-3