From: Jaeheon Yoo (kghost@xxxxxxxxxxxx)
Date: Mon Feb 04 2002 - 22:23:29 GMT-3
I guess this link will help you much better.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/1
21t2/dtfrswen.htm
Jaeheon
----- Original Message -----
From: "Paul Jin" <pauljin@yahoo.com>
To: "John Neiberger" <neiby@ureach.com>; "Landon Fitts" <l.fitts@mindspring.com
>; <ccielab@groupstudy.com>
Sent: Tuesday, February 05, 2002 9:16 AM
Subject: Re: FRTS Verification
>
> The router does the best in can do take the place of a frame relay switch bu
t it cannot do everything.
>
> To recieve fecn/becn, you must setup additional parameters on the switch. Fo
r example, Peak rate, CIR, different queues
> and at what point the fecn/becn will be triggered, etc... The router does not
have that capability. At least not that i know of.
>
> When we configure the router as a frame switch, all we really told it to do i
s configure dlci number at each port and which
> way it should be routed out. It is missing everything else a normal frame sw
itch will give them.
>
> - Paul
>
>
>
>
>
>
> John Neiberger <neiby@ureach.com> wrote: I'm not positive about this, but I
don't think that Cisco
> routers support FECNs/BECNs when configured as frame relay
> switches. I can't remember why I think this, it just seems
> like I read it somewhere.
>
> John
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:11 GMT-3