From: Ma Gang (matthen@xxxxxxxxxxxx)
Date: Mon Jan 07 2002 - 03:53:32 GMT-3
Dear Folks,
Many thanks to whom responded my mail. But they all failed.
The key point of this issue is "Keyboard hitting has no reaction when it is
booting".
Anyway, I believe it must be some speed setting under line console 0 and
hope there is no such "no service password-recovery" command.
Let it be...
Regards
Matthew Ma
--- Ma Gang <matthen@zisco.com.cn> wrote:
> Dear All,
>
> I got a wounded 2611 router, its config register may
> be revised by somebody.
> The symptom is
>
> 1. It can boot and shows the booting message on the
> normal 9600/8/N/1
> console.
>
> 2. It has NO response when you hit the keyboard
>
> 3. There is also no reaction when you try to
> CTRL+BREAK when it is booting
>
> 4. You can access it by AUX port, but only User
> Mode. It says "no enable
> password set" when you try to enter Privilege Mode.
>
> 5. I have tried alternative CON setting such as
> speed and stopbits but
> failed.
>
> 6. It does have configuration in its NVRAM.
>
>
> Can anybody save my poor router?
>
> Thanks.
>
>
> Regards
>
> Matthew Ma
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:18 GMT-3