From: kym blair (kymblair@xxxxxxxxxxx)
Date: Mon Jan 07 2002 - 10:53:24 GMT-3
Ditto. On some computers, I just can't find the break key for HyperTerm but
have no problem with ProComm+. On other computers, it's just the opposite.
Hope your router is okay and you're just having a problem finding the break
key.
>From: "How Ming Low" <ming@isatechnologies.com>
>Reply-To: "How Ming Low" <ming@isatechnologies.com>
>To: "Abu Hadee" <ciscotrng@yahoo.com>, "Ma Gang" <matthen@zisco.com.cn>,
> "ccie lab" <ccielab@groupstudy.com>
>Subject: RE: My router is dying...
>Date: Mon, 7 Jan 2002 16:09:19 +0800
>
>I totally agree, at first i thought that it was my 2500 router, but upon
>using different terminal applications, i could issue the Ctrl+Break key.
>E.g. using Terra Term it did not work, switched to Hyperterm and voila!
>Hey Presto, and Bob's your uncle.
>
>
>
>-----Original Message-----
>From: Abu Hadee [mailto:ciscotrng@yahoo.com]
>Sent: Monday, January 07, 2002 3:53 PM
>To: Ma Gang; 'ccie lab'
>Subject: Re: My router is dying...
>
>
>Well, i had same problem. but i found the problem with the terminal
>application. I tried with other pc, and without any problem it worked.
>
>Well, i dont have any idea what's ur problem, i just wanted to share my
>experience.. hope this helps.
>
>thanks
>----- Original Message -----
>From: "Ma Gang" <matthen@zisco.com.cn>
>To: "'ccie lab'" <ccielab@groupstudy.com>
>Sent: Sunday, January 06, 2002 10:53 PM
>Subject: My router is dying...
>
>
> > Dear Folks,
> >
> > Many thanks to whom responded my mail. But they all failed.
> >
> > The key point of this issue is "Keyboard hitting has no reaction when
>it
>is
> > booting".
> >
> > Anyway, I believe it must be some speed setting under line console 0
>and
> > hope there is no such "no service password-recovery" command.
> >
> > Let it be...
> >
> >
> > Regards
> >
> > Matthew Ma
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --- Ma Gang <matthen@zisco.com.cn> wrote:
> > > Dear All,
> > >
> > > I got a wounded 2611 router, its config register may
> > > be revised by somebody.
> > > The symptom is
> > >
> > > 1. It can boot and shows the booting message on the
> > > normal 9600/8/N/1
> > > console.
> > >
> > > 2. It has NO response when you hit the keyboard
> > >
> > > 3. There is also no reaction when you try to
> > > CTRL+BREAK when it is booting
> > >
> > > 4. You can access it by AUX port, but only User
> > > Mode. It says "no enable
> > > password set" when you try to enter Privilege Mode.
> > >
> > > 5. I have tried alternative CON setting such as
> > > speed and stopbits but
> > > failed.
> > >
> > > 6. It does have configuration in its NVRAM.
> > >
> > >
> > > Can anybody save my poor router?
> > >
> > > Thanks.
> > >
> > >
> > > Regards
> > >
> > > Matthew Ma
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:18 GMT-3