From: Yves@xxxxxxxxx
Date: Mon Jan 07 2002 - 13:57:03 GMT-3
----- Forwarded by Yves Fauser/User/Goetze on 07.01.2002 17:56 -----
Yves Fauser
07.01.2002 10:48
To: "How Ming Low" <ming@isatechnologies.com>
cc:
Subject: RE: My router is dying...
Once my AS2509 Terminal Server had the same problem that you described. I
though it must have something to do with the Console Line or my Terminal
Emulation, but at the end it was just the IOS that was hung up right after
boot. Erasing the Config in boot mode solved the problem.
Yves
"How Ming Low" <ming@isatechnologies.com>
Sent by: nobody@groupstudy.com
07.01.2002 09:09
Please respond to "How Ming Low"
To: "Abu Hadee" <ciscotrng@yahoo.com>, "Ma Gang" <matthen@zisco.com
.cn>, "ccie
lab" <ccielab@groupstudy.com>
cc:
Subject: RE: My router is dying...
I totally agree, at first i thought that it was my 2500 router, but upon
using different terminal applications, i could issue the Ctrl+Break key.
E.g. using Terra Term it did not work, switched to Hyperterm and voila!
Hey Presto, and Bob's your uncle.
-----Original Message-----
From: Abu Hadee [mailto:ciscotrng@yahoo.com]
Sent: Monday, January 07, 2002 3:53 PM
To: Ma Gang; 'ccie lab'
Subject: Re: My router is dying...
Well, i had same problem. but i found the problem with the terminal
application. I tried with other pc, and without any problem it worked.
Well, i dont have any idea what's ur problem, i just wanted to share my
experience.. hope this helps.
thanks
----- Original Message -----
From: "Ma Gang" <matthen@zisco.com.cn>
To: "'ccie lab'" <ccielab@groupstudy.com>
Sent: Sunday, January 06, 2002 10:53 PM
Subject: My router is dying...
> Dear Folks,
>
> Many thanks to whom responded my mail. But they all failed.
>
> The key point of this issue is "Keyboard hitting has no reaction when
it
is
> booting".
>
> Anyway, I believe it must be some speed setting under line console 0
and
> hope there is no such "no service password-recovery" command.
>
> Let it be...
>
>
> Regards
>
> Matthew Ma
>
>
>
>
>
>
>
>
>
>
> --- Ma Gang <matthen@zisco.com.cn> wrote:
> > Dear All,
> >
> > I got a wounded 2611 router, its config register may
> > be revised by somebody.
> > The symptom is
> >
> > 1. It can boot and shows the booting message on the
> > normal 9600/8/N/1
> > console.
> >
> > 2. It has NO response when you hit the keyboard
> >
> > 3. There is also no reaction when you try to
> > CTRL+BREAK when it is booting
> >
> > 4. You can access it by AUX port, but only User
> > Mode. It says "no enable
> > password set" when you try to enter Privilege Mode.
> >
> > 5. I have tried alternative CON setting such as
> > speed and stopbits but
> > failed.
> >
> > 6. It does have configuration in its NVRAM.
> >
> >
> > Can anybody save my poor router?
> >
> > Thanks.
> >
> >
> > Regards
> >
> > Matthew Ma
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:18 GMT-3