From: Fanglo MA (fangloma@xxxxxxxxxxxxxx)
Date: Tue Dec 18 2001 - 10:51:54 GMT-3
Dear Gordon,
As I remember right, there is one CCIE advised to sale one OC-8600, you
can try searching the list and try the right direction.
HTH
Fanglo
On Mon, 17 Dec 2001, Gordon Olson wrote:
> I have an Olicom OC-8600 runs the 3920 IOS. I get he
> following error when trying to boot it.
>
> Looking for any suggestions, I have recently opened
> the switch to see if anything was loose, nothing
> appears to be. Thanks in advance for your input.
>
> BootStrap Firmware v2.2, Copyright 1996-1997
> - Initiating bootstrapping sequence.
> - Boot image integrity check...Passed.
> - Control transferred to boot process.
>
> Boot Firmware (Phase II) v2.1
> - Relocating main image to
> DRAM.................................................
> .........................................................Done.
> - Main image integrity check...succeeded.
> - Control transferred to main process.
> - Bypassing diagnostics.
>
> System Software Version 02.54H, Copyright 1994-1997.
> System started on Sun. September 16, 2001 06:21:13
> 8 Megabytes System memory
> 2 Megabytes Network memory
> - Initialization started
> - Change NVRAM size from 0x0 to 0x20000
> - failed to change NVRAM size: malloc failed
> - NVRAM size is still 0x0
> - Failed to upgrade to bigger File System
> - File system initialized
> - System temperature is within safe operating levels
> - Checking file system integrity
> - Warmboot initialization started
> WARNING: CrossFire Stack : Sub-directory creation
> failed
> No Such File or Directory
> WARNING: Unable to Write Port Config Data for port 1,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 2,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 3,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 4,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 5,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 6,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 7,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 8,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 9,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 10,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 11,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 12,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 13,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 14,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 15,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 16,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 17,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 18,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 19,
> rc=-300
> Failed writing to NVRAM
> WARNING: Unable to Write Port Config Data for port 20,
> rc=-300
> Failed writing to NVRAM
> - LAN ports detected:
> - RJ-45 Token Ring: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
> 15 16 17 18 19 20
> - Initializing Ports: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
> 15 16 17 18 19 20
> - Initializing system address table
>
> WARNING: Diagnostics failed to store information.
> WARNING: CrossFire Stack: Sub-directory creation
> failed
> No Such File or Directory
> - System entering stand-alone mode
> - Local box number: 1
> CrossFire Token-Ring Switch initiating bootp requests
> on one or more VLANs
> WARNING: Control box (1) failed NV Ram VTP
> configuration store
> FATAL SYSTEM ERROR: vtp_activate: bad return 42 from
> vtp_download_info
>
>
>
> =====
> Thank you,
>
> Gordon Olson
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:44 GMT-3