From: Mark Newcomb (MNewcomb@xxxxxxxxxxxx)
Date: Tue Dec 18 2001 - 15:51:28 GMT-3
I would try changing out the NVRAM - I thinmk that the main memory is
good, but the NVRAM is bad. This is based on the following lines:
- Relocating main image to
DRAM.................................................
.........................................................Done.
- Main image integrity check...succeeded.
AND
- Change NVRAM size from 0x0 to 0x20000
- failed to change NVRAM size: malloc failed
- NVRAM size is still 0x0
Other opinions gladly accepted.
-----Original Message-----
From: Gordon Olson [mailto:gordonolson@yahoo.com]
Sent: Monday, December 17, 2001 9:01 PM
To: ccielab@groupstudy.com
Subject: 3920\Olicom OC-8600 will not boot
I have an Olicom OC-8600 runs the 3920 IOS. I get he
following error when trying to boot it.
Looking for any suggestions, I have recently opened
the switch to see if anything was loose, nothing
appears to be. Thanks in advance for your input.
BootStrap Firmware v2.2, Copyright 1996-1997
- Initiating bootstrapping sequence.
- Boot image integrity check...Passed.
- Control transferred to boot process.
Boot Firmware (Phase II) v2.1
- Relocating main image to
DRAM.................................................
.........................................................Done.
- Main image integrity check...succeeded.
- Control transferred to main process.
- Bypassing diagnostics.
System Software Version 02.54H, Copyright 1994-1997.
System started on Sun. September 16, 2001 06:21:13
8 Megabytes System memory
2 Megabytes Network memory
- Initialization started
- Change NVRAM size from 0x0 to 0x20000
- failed to change NVRAM size: malloc failed
- NVRAM size is still 0x0
- Failed to upgrade to bigger File System
- File system initialized
- System temperature is within safe operating levels
- Checking file system integrity
- Warmboot initialization started
WARNING: CrossFire Stack : Sub-directory creation
failed
No Such File or Directory
WARNING: Unable to Write Port Config Data for port 1,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 2,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 3,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 4,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 5,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 6,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 7,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 8,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 9,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 10,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 11,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 12,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 13,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 14,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 15,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 16,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 17,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 18,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 19,
rc=-300
Failed writing to NVRAM
WARNING: Unable to Write Port Config Data for port 20,
rc=-300
Failed writing to NVRAM
- LAN ports detected:
- RJ-45 Token Ring: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20
- Initializing Ports: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20
- Initializing system address table
WARNING: Diagnostics failed to store information.
WARNING: CrossFire Stack: Sub-directory creation
failed
No Such File or Directory
- System entering stand-alone mode
- Local box number: 1
CrossFire Token-Ring Switch initiating bootp requests
on one or more VLANs
WARNING: Control box (1) failed NV Ram VTP
configuration store
FATAL SYSTEM ERROR: vtp_activate: bad return 42 from
vtp_download_info
=====
Thank you,
Gordon Olson
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:44 GMT-3