From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Tue Dec 18 2001 - 03:42:45 GMT-3
Should be marked right on the port with (A/S)...
----- Original Message -----
From: "Michael Popovich" <m.popovich@home.com>
To: "CCIE GROUPSTUDY" <ccielab@groupstudy.com>
Sent: Monday, December 17, 2001 8:15 PM
Subject: 2523 Question
> On the 2523 or 2522 does anyone know which 2 ports are the High Speed
Async? I
> think they are S0 and S1. If so has anyone every had problems doing
> frame-relay switching between a high speed and low speed interface? For
> example between serial 0 and serial 2 with clockrates set at 64000.
>
> I was having an issue tonight in which I was doing frame-switching between
> those exact two interfaces at 64000 bits. I could not get Serial 0 to come
up.
> LMI kept timing out. I have never had any problems before with this port
and
> have used in not doing frame-switching. I replaced cables and that didn't
> help. I finally just put the DCE cable into Serial 3 and everything works
> fine.
>
> Any thoughts?? Using 11.0(10.3) IOS.
>
> MP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:44 GMT-3