ISDN Line problem

From: chih_chung@xxxxxxxxxxx
Date: Wed Dec 12 2001 - 04:51:53 GMT-3

Next message: Frank Lu: "OT: 3640 FXO backup VG200 T1"
Previous message: KK FoK: "bitswap-layer3-addresses"
Next in thread: william phang: "RE: ISDN Line problem"
Maybe reply: william phang: "RE: ISDN Line problem"
Maybe reply: Duy Nguyen: "RE: ISDN Line problem"
Maybe reply: chih_chung@xxxxxxxxxxx: "RE: ISDN Line problem"
Maybe reply: Tu Nguyen: "RE: ISDN Line problem"
Maybe reply: Ahmed Mamoor Amimi: "RE: ISDN Line problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I am having some trouble with my ISDN, I don't really know if it's CO's
problem or my isdn router. when I enter "show isdn status" both of my router
shows

Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
        TEI = 73, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
        TEI 64, ces = 1, state = 5(init)

but I just can't ping another side. I did "debug isdn q931 and q921", it's
showing up with

03:39:08: Cause i = 0x82D8 - Incompatible destination
03:39:08: Signal i = 0x03 - Network congestion tone on

Does anyone know if that my side or CO's side is having problem.
thanks

Next message: Frank Lu: "OT: 3640 FXO backup VG200 T1"
Previous message: KK FoK: "bitswap-layer3-addresses"
Next in thread: william phang: "RE: ISDN Line problem"
Maybe reply: william phang: "RE: ISDN Line problem"
Maybe reply: Duy Nguyen: "RE: ISDN Line problem"
Maybe reply: chih_chung@xxxxxxxxxxx: "RE: ISDN Line problem"
Maybe reply: Tu Nguyen: "RE: ISDN Line problem"
Maybe reply: Ahmed Mamoor Amimi: "RE: ISDN Line problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3