From: william phang (dtcindo@xxxxxxxxx)
Date: Wed Dec 12 2001 - 03:02:16 GMT-3
Hello,
Please check this link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/dbook/disdn.
htm,
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
chih_chung@hotmail.com
Sent: Wednesday, December 12, 2001 4:52 AM
To: ccielab@groupstudy.com
Subject: ISDN Line problem
I am having some trouble with my ISDN, I don't really know if it's CO's
problem or my isdn router. when I enter "show isdn status" both of my router
shows
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 73, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI 64, ces = 1, state = 5(init)
but I just can't ping another side. I did "debug isdn q931 and q921", it's
showing up with
03:39:08: Cause i = 0x82D8 - Incompatible destination
03:39:08: Signal i = 0x03 - Network congestion tone on
Does anyone know if that my side or CO's side is having problem.
thanks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3