From: Thomas Larus (tlarus@xxxxxxx)
Date: Mon Nov 26 2001 - 21:53:48 GMT-3
I had some problems with ip ospf demand circuit for a long time. I am
getting better results with a newer ios. Try a newer IOs and see if
your results are different. I had the exact same thing happen. The
link would go down, and the routes would disappear, then the LSAs about
the lost routes would bring up the isdn link.
Thomas Larus
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Chadd Workman
Sent: Monday, November 26, 2001 6:48 PM
To: ccielab
Subject: ip ospf demand-circuit and dialer interfaces
When I configure IP OSPF Demand-Circuit on BRI0 I have no problems. But
when I use Dialer Interfaces and IP OSPF Demand-Circuit, OSPF
recalculated
every time the circuit goes down. One more thing, if I use a Dialer
Interface on one end and BRI0 on the other, no problem. It is only when
I
use a Dialer on both. I'm not including my configs because they only
contain the basic elements. I just want to know if anyone has seen
this.
Chadd Workman
Network Systems Engineer
CCNP/DP CCSE CNE
Lucent Worldwide Services, Houston
Chadd_Workman@lucent.com
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:23 GMT-3