From: Chris Larson (clarson52@xxxxxxxx)
Date: Mon Nov 26 2001 - 21:44:40 GMT-3
Without seeing the configs, I have this problem when I forget to put
no peer neighbor-route
into the config when it is needed. This makes the router recalc everytime
the ISDN goes down (which of course brings the line back up).
----- Original Message -----
From: "Chadd Workman" <chadd_workman@lucent.com>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Monday, November 26, 2001 6:47 PM
Subject: ip ospf demand-circuit and dialer interfaces
> When I configure IP OSPF Demand-Circuit on BRI0 I have no problems. But
> when I use Dialer Interfaces and IP OSPF Demand-Circuit, OSPF recalculated
> every time the circuit goes down. One more thing, if I use a Dialer
> Interface on one end and BRI0 on the other, no problem. It is only when I
> use a Dialer on both. I'm not including my configs because they only
> contain the basic elements. I just want to know if anyone has seen this.
>
> Chadd Workman
> Network Systems Engineer
> CCNP/DP CCSE CNE
> Lucent Worldwide Services, Houston
> Chadd_Workman@lucent.com
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:23 GMT-3