From: Chadd Workman (chadd_workman@xxxxxxxxxx)
Date: Mon Nov 26 2001 - 20:47:38 GMT-3
When I configure IP OSPF Demand-Circuit on BRI0 I have no problems. But
when I use Dialer Interfaces and IP OSPF Demand-Circuit, OSPF recalculated
every time the circuit goes down. One more thing, if I use a Dialer
Interface on one end and BRI0 on the other, no problem. It is only when I
use a Dialer on both. I'm not including my configs because they only
contain the basic elements. I just want to know if anyone has seen this.
Chadd Workman
Network Systems Engineer
CCNP/DP CCSE CNE
Lucent Worldwide Services, Houston
Chadd_Workman@lucent.com
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:23 GMT-3