From: Ken Snyder (phizzog@xxxxxxxx)
Date: Mon Nov 26 2001 - 21:49:54 GMT-3
The backup command on a Sub interface is used to meet the DLCI
requirement. I'm looking into that Authentication issue.
Regards,
-Ken
-----Original Message-----
From: Jim Brown [mailto:Jim.Brown@CaseLogic.com]
Sent: Monday, November 26, 2001 1:33 PM
To: 'Ken Snyder'; Jim Brown; ccielab@groupstudy.com
Subject: RE: Boot Camp Lab 20
How about all of the important parts of the ISDN section
There are username and passwords on both ends and one of the
requirements is
authentication only one way and I see nothing in the solution configs to
support this. PPP callin maybe?
The requirement for the link to fire up if the DLCI fails? I see nothing
to
support this requirement? I would probably use FREEK?
-----Original Message-----
From: Ken Snyder [mailto:phizzog@home.com]
Sent: Monday, November 26, 2001 5:25 PM
To: 'Jim Brown'; ccielab@groupstudy.com
Subject: RE: Boot Camp Lab 20
Please provide more information regarding your issue with Lab 20's ISDN.
Regards,
-Ken
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jim
Brown
Sent: Monday, November 26, 2001 1:08 PM
To: ccielab@groupstudy.com
Subject: Boot Camp Lab 20
Has anyone looked at CCBootCamp Lab 20 solution? The ISDN requirements
on
the lab are not reflected in the solution configs as far as I can tell.
I definitely don't see the one way authentication.
I'm starting to work through some of these and the errors are driving me
crazy.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:23 GMT-3