From: Dennis Howerton 3 (dhowerton@xxxxxxxxxxxxxxxxxxxxx)
Date: Thu Oct 04 2001 - 15:49:29 GMT-3
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/atip
x_c/ipx/2cdipx.htm#1004416
----------------------------------------------------------------------------
---- Note By default, floating static routes are not redistributed into other dynamic protocols.---------------------------------------------------------------------------- ----
----- Original Message ----- From: "Lionel Florit" <lflorit@cisco.com> To: <ccielab@groupstudy.com> Sent: Thursday, October 04, 2001 1:25 PM Subject: NLSP floating static redistribution
> hi guys, > > is there a trick to redistribute floating static into NLSP? I thought it > was done by default. When I do "redistribute static" under NLSP config I > don't see anything coming up in the Show run. Unlike with IPXRIP or EIGRP, > I didn't see any specific options for floating static... > > here is my topology > r1--hdlc--r2--BRI-r3 > > The BRI link is in idle state with floating static associated to that link. > a show ipx route on r2 displays the floating static routes pointing toward BRI0 > I run ipxwan over the HDLC link. > I don't see the floating statics on r1. > > thanks for your help > Lionel > **Please read:http://www.groupstudy.com/list/posting.html
[GroupStudy.com removed an attachment of type image/gif which had a name of not e3.gif] **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:13 GMT-3