NLSP floating static redistribution

From: Lionel Florit (lflorit@xxxxxxxxx)
Date: Thu Oct 04 2001 - 14:25:20 GMT-3

Next message: Dennis Laganiere: "RE: Is there a limitation on roll cable."
Previous message: Omar: "automatic redistribution between IGRP and EIGRP."
Next in thread: Dennis Howerton 3: "Re: NLSP floating static redistribution"
Maybe reply: Dennis Howerton 3: "Re: NLSP floating static redistribution"
Maybe reply: Sasa Milic: "Re: NLSP floating static redistribution"
Maybe reply: Lionel Florit: "Re: NLSP floating static redistribution"
Maybe reply: Sasa Milic: "Re: NLSP floating static redistribution"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

hi guys,

is there a trick to redistribute floating static into NLSP? I thought it
was done by default. When I do "redistribute static" under NLSP config I
don't see anything coming up in the Show run. Unlike with IPXRIP or EIGRP,
I didn't see any specific options for floating static...

here is my topology
r1--hdlc--r2--BRI-r3

The BRI link is in idle state with floating static associated to that link.
a show ipx route on r2 displays the floating static routes pointing toward BRI0
I run ipxwan over the HDLC link.
I don't see the floating statics on r1.

thanks for your help
Lionel
**Please read:http://www.groupstudy.com/list/posting.html

Next message: Dennis Laganiere: "RE: Is there a limitation on roll cable."
Previous message: Omar: "automatic redistribution between IGRP and EIGRP."
Next in thread: Dennis Howerton 3: "Re: NLSP floating static redistribution"
Maybe reply: Dennis Howerton 3: "Re: NLSP floating static redistribution"
Maybe reply: Sasa Milic: "Re: NLSP floating static redistribution"
Maybe reply: Lionel Florit: "Re: NLSP floating static redistribution"
Maybe reply: Sasa Milic: "Re: NLSP floating static redistribution"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:13 GMT-3