From: Sasa Milic (smilic@xxxxxxxx)
Date: Fri Oct 05 2001 - 03:11:28 GMT-3
Actually, you can use "redistribute floating-static" with
EIGRP, but not with NLSP. Sorry, my mistake.
Sasa
Lionel Florit wrote:
>
> I must be doing something very stupid but I don't have an option for
> floating statics and when I tried "redistribute static" it doesn't show in
> my config...
>
> R10#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> R10(config)#ipx router NLSP
> R10(config-ipx-router)#redistribute ?
> eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)
> nlsp IPX Netware Link Services Protocol
> rip Routing Information Protocol (RIP)
> static Static routes
> R10(config-ipx-router)#
>
> running Version 12.0(19)
>
> At 11:52 AM 10/4/2001 -0700, Sasa Milic wrote:
> >redistribute floating-static
> >
> >
> >Sasa
> >
> >Lionel Florit wrote:
> > >
> > > hi guys,
> > >
> > > is there a trick to redistribute floating static into NLSP? I thought it
> > > was done by default. When I do "redistribute static" under NLSP config I
> > > don't see anything coming up in the Show run. Unlike with IPXRIP or EIGRP
,
> > > I didn't see any specific options for floating static...
> > >
> > > here is my topology
> > > r1--hdlc--r2--BRI-r3
> > >
> > > The BRI link is in idle state with floating static associated to that lin
k.
> > > a show ipx route on r2 displays the floating static routes pointing
> > toward BRI0
> > > I run ipxwan over the HDLC link.
> > > I don't see the floating statics on r1.
> > >
> > > thanks for your help
> > > Lionel
> > > **Please read:http://www.groupstudy.com/list/posting.html
> >**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:13 GMT-3