From: Lionel Florit (lflorit@xxxxxxxxx)
Date: Thu Oct 04 2001 - 20:18:55 GMT-3
I must be doing something very stupid but I don't have an option for
floating statics and when I tried "redistribute static" it doesn't show in
my config...
R10#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R10(config)#ipx router NLSP
R10(config-ipx-router)#redistribute ?
eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)
nlsp IPX Netware Link Services Protocol
rip Routing Information Protocol (RIP)
static Static routes
R10(config-ipx-router)#
running Version 12.0(19)
At 11:52 AM 10/4/2001 -0700, Sasa Milic wrote:
>redistribute floating-static
>
>
>Sasa
>
>Lionel Florit wrote:
> >
> > hi guys,
> >
> > is there a trick to redistribute floating static into NLSP? I thought it
> > was done by default. When I do "redistribute static" under NLSP config I
> > don't see anything coming up in the Show run. Unlike with IPXRIP or EIGRP,
> > I didn't see any specific options for floating static...
> >
> > here is my topology
> > r1--hdlc--r2--BRI-r3
> >
> > The BRI link is in idle state with floating static associated to that link.
> > a show ipx route on r2 displays the floating static routes pointing
> toward BRI0
> > I run ipxwan over the HDLC link.
> > I don't see the floating statics on r1.
> >
> > thanks for your help
> > Lionel
> > **Please read:http://www.groupstudy.com/list/posting.html
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:13 GMT-3