From: David Siwula (DSiwula@xxxxxxxxx)
Date: Thu Sep 06 2001 - 20:47:00 GMT-3
For the life of me I cannot get various messages to show up in the log.
For example, messages like
13w2d: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to up
13w2d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5,
changed state to up
13w2d: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to d
Or any kind of debug icmp messages and that sort of thing.
This is what happens from show log
Success rate is 100 percent (5/5), round-trip min/avg/max = 79/84/99 ms
DCTC_7thflr-3548XL#sh log
Syslog logging: enabled (0 messages dropped, 6 flushes, 0 overruns)
Console logging: level debugging, 644 messages logged
Monitor logging: level debugging, 6 messages logged
Logging to: vty2(5)
Buffer logging: level debugging, 4 messages logged
File logging: disabled
Trap logging: level informational, 340 message lines logged
I am telneting to the device. I enter term mon and it is configured as
I have on others where it works. I am in line vty 1 and for some reason
the messages are being sent to line vty 2.
Please advise.....
Thanks, Dave
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:15 GMT-3