From: Yves Fauser (Yves@xxxxxxxxx)
Date: Fri Sep 07 2001 - 04:17:12 GMT-3
Hi David,
do you have <logging synchronous> in your config ?
Yves
David Siwula wrote:
>For the life of me I cannot get various messages to show up in the log.
>For example, messages like
>
>13w2d: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to up
>13w2d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5,
>changed state to up
>13w2d: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to d
>
>Or any kind of debug icmp messages and that sort of thing.
>
>This is what happens from show log
>
>Success rate is 100 percent (5/5), round-trip min/avg/max = 79/84/99 ms
>DCTC_7thflr-3548XL#sh log
>Syslog logging: enabled (0 messages dropped, 6 flushes, 0 overruns)
> Console logging: level debugging, 644 messages logged
> Monitor logging: level debugging, 6 messages logged
> Logging to: vty2(5)
> Buffer logging: level debugging, 4 messages logged
> File logging: disabled
> Trap logging: level informational, 340 message lines logged
>
>I am telneting to the device. I enter term mon and it is configured as
>I have on others where it works. I am in line vty 1 and for some reason
>the messages are being sent to line vty 2.
>
>Please advise.....
>
>Thanks, Dave
>**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:15 GMT-3