From: jack chen (ccielab2000@xxxxxxxxx)
Date: Sun Jun 17 2001 - 11:32:53 GMT-3
Hello,
I'm working with dialer-watch backup for OSPF.
It say that dialer-watch don't need intersting
packet,right?
But my config is not work ,the debug information
told me 'no dialer map/string present in bri0
interface'
interface BRI0
ip address 10.10.1.3 255.255.255.0
encapsulation ppp
dialer idle-timeout 60
dialer map ip 10.10.1.2 name r2 broadcast 53511676
dialer hold-queue 50
dialer watch-group 1
dialer-group 1
isdn switch-type basic-net3
ppp authentication chap
access-list 101 deny ip any host 255.255.255.255
access-list 101 permit ip any any
dialer watch-list 1 ip 10.2.2.0 255.255.255.0
dialer-list 1 protocol ip list 101
Why?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:25 GMT-3