From: Brian Dennis (brian@xxxxxx)
Date: Sun Jun 17 2001 - 12:37:24 GMT-3
This is what he is probably getting.
DDR: Dialer Watch watch-group 1 - dialer
map/string not present on BRI0
He will get this error if he doesn't have a dialer map for the network that
is being watched.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
brian@5g.net
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Theodore TZEVELEKIS
> Sent: Sunday, June 17, 2001 7:55 AM
> To: jack chen; ccielab@groupstudy.com
> Subject: RE: dialer watch's interesting packet
>
>
> dialer watch will check the existance of a certain route in your routing
> table. If it dissappears, it activates the link.
> That's all it does.
>
> The debug message is probably due to some routing protocol or
> other process
> that sends packets to an IP address different than the one
> specified in you
> dialer map statement.
>
> Theo
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> jack chen
> Sent: Sunday, June 17, 2001 4:33 PM
> To: ccielab@groupstudy.com
> Subject: dialer watch's interesting packet
>
>
> Hello,
> I'm working with dialer-watch backup for OSPF.
> It say that dialer-watch don't need intersting
> packet,right?
> But my config is not work ,the debug information
> told me 'no dialer map/string present in bri0
> interface'
> interface BRI0
> ip address 10.10.1.3 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 60
> dialer map ip 10.10.1.2 name r2 broadcast 53511676
> dialer hold-queue 50
> dialer watch-group 1
> dialer-group 1
> isdn switch-type basic-net3
> ppp authentication chap
> access-list 101 deny ip any host 255.255.255.255
> access-list 101 permit ip any any
> dialer watch-list 1 ip 10.2.2.0 255.255.255.0
> dialer-list 1 protocol ip list 101
>
>
> Why?
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:25 GMT-3