From: Roman Rodichev (rodic000@xxxxxxxxxxx)
Date: Sat Jun 09 2001 - 01:18:02 GMT-3
you can't change this behavior of OSPF. OSPF process will do its job
deciding which route is better (using the order that you specified) and pass
it on to the "routing table" process.
distance is used to interact with other routing protocols
>From: "Walid Fahme" <walid_ccie@hotmail.com>
>Reply-To: "Walid Fahme" <walid_ccie@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: OSPF InterArea route preference over Intraarea route
>Date: Thu, 07 Jun 2001 16:47:45 +0400
>
>Does anyone know of a way to force OSPF to choose an (IA) route
>to a destination network over an intra area route (O).
>
>OSPF Route preference behavior:
>Intra Area (O)
>Inter Area (IA)
>External Type 1 (E1)
>External Type 2 (E2)
>
>I have tried to modify the administrative distance of the intra
>area route to a high value, but still it chooses (O) over (IA).
>
>distance 120 132.1.150.5 0.0.0.0
>All routes from this neighbor are given an admin distance of 120
>The two routes are:
>
>IA 132.1.150.0 /24 (110/77) 132.1.20.2
>O 132.1.150.0 /2v4 (120/1563) 132.1.150.5
>
>Only the (O) route is installed in the routing table. (IA) route is
>only installed when the (O) route disappears.
>
>Appreciate your earliest responses.
>
>Ciao,
>Walid.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:21 GMT-3