RE: How to inject a default route into ISIS level-1?

From: Andrew Lennon (andrew.lennon@xxxxxxxxxxxxx)
Date: Tue May 08 2001 - 08:14:44 GMT-3

• Next message: Tariq Sharif: "RE: Custom Queuing Scenario"
• Previous message: Richard Gallagher: "Re: Custom Queuing Scenario"
• Maybe in reply to: Jaeheon Yoo: "How to inject a default route into ISIS level-1?"
• Next in thread: Jaeheon Yoo: "Re: How to inject a default route into ISIS level-1?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Jaeheon,

Don't think you can redist into a L1 ISIS router. Have you tried crerating
a static to null0 on the L2 box and redistributing that into ISIS-L2 ?

Andy

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jaeheon Yoo
Sent: 08 May 2001 06:06
To: ccielab
Subject: How to inject a default route into ISIS level-1?

Hi, all
I have two isis routers A,B.
A is a level-1 router and B is a level-1-2 router. They are connected via a
serial connection
B is also connected to another router which is not running ISIS.
So, B's level 1 LSP is not marked with ATT bit set.
Therefore, even if both A and B is enabled with "clns router isis", it
doesn't do what I want.
And "default-information originate" won't be redistributed into level-1.

How can I inject a default route into ISIS level-1 only router?

Thanks in advance.

Regards,
Jaeheon
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Tariq Sharif: "RE: Custom Queuing Scenario"
• Previous message: Richard Gallagher: "Re: Custom Queuing Scenario"
• Maybe in reply to: Jaeheon Yoo: "How to inject a default route into ISIS level-1?"
• Next in thread: Jaeheon Yoo: "Re: How to inject a default route into ISIS level-1?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3