From: Jaeheon Yoo (kghost@xxxxxxxxxxxx)
Date: Tue May 08 2001 - 10:08:42 GMT-3
Hi, Andrew,
Redistributing a default static route won't do,
I've found a solution for myself after some more labs.
router isis
net 49.0001.1111.1111.1111.00
default-information originate route-map LEVEL-D
route-map LEVEL-D permit 10
set level level-1
What do you think about that?
Thanks,
Regards,
Jaeheon
----- Original Message -----
From: "Andrew Lennon" <andrew.lennon@nscglobal.com>
To: "Jaeheon Yoo" <kghost@chollian.net>; "ccielab" <ccielab@groupstudy.com>
Sent: Tuesday, May 08, 2001 8:14 PM
Subject: RE: How to inject a default route into ISIS level-1?
>
> Jaeheon,
>
> Don't think you can redist into a L1 ISIS router. Have you tried
crerating
> a static to null0 on the L2 box and redistributing that into ISIS-L2 ?
>
> Andy
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Jaeheon Yoo
> Sent: 08 May 2001 06:06
> To: ccielab
> Subject: How to inject a default route into ISIS level-1?
>
>
> Hi, all
> I have two isis routers A,B.
> A is a level-1 router and B is a level-1-2 router. They are connected via
a
> serial connection
> B is also connected to another router which is not running ISIS.
> So, B's level 1 LSP is not marked with ATT bit set.
> Therefore, even if both A and B is enabled with "clns router isis", it
> doesn't do what I want.
> And "default-information originate" won't be redistributed into level-1.
>
> How can I inject a default route into ISIS level-1 only router?
>
> Thanks in advance.
>
> Regards,
> Jaeheon
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3