From: BUI, TIN T (SBCSI) (tb4565@xxxxxxx)
Date: Fri Jan 26 2001 - 16:05:45 GMT-3
Suppose I have bridge group 1 and bridge group 2 on R1 and I have bridge
group 1 on R2 and I want to link them together via dlsw. Would this be a
correct config or do I not need dlsw bridge-group 2? thanks
Router 1
!
source-bridge ring-group 2000
dlsw bridge-group 1
dlsw bridge-group 2
dlsw local-peer peer-id 150.150.1.1
dlsw remote-peer 0 tcp 150.150.2.1
!
interface Loopback0
ip address 150.150.1.1 255.255.255.0
!
interface Ethernet0
ip address 150.150.30.1 255.255.255.0
bridge-group 1
!
interface ethernet1
ip address 150.150.31.1 255.255.255.0
bridge-group 2
bridge 1 protocol dec
bridge 2 protocol dec
!
Router 2:
!
source-bridge ring-group 2000
dlsw local-peer peer-id 150.150.2.1
dlsw remote-peer 0 tcp 150.150.1.1
dlsw bridge-group 1
!
interface Loopback0
ip address 150.150.2.1 255.255.255.0
!
interface Serial0
ip address 150.150.100.2 255.255.255.0
!
interface Ethernet0
ip address 150.150.40.1 255.255.255.0
bridge-group 1
!
bridge 1 protocol dec
> Tin T. Bui
> Senior Network Manager
> CCNP, CNE, MCP
> Network Management Center
> SBC Services Inc.
> 7337 Trade Street, Rm 1110
> San Diego, Ca 92121
> Office #: 858-886-4644/858-886-4589
> Pager #: 858-494-0482
> Fax #: 858-549-4103
> Email: tb4565@sbc.com
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:44 GMT-3