From: Nigel Taylor (nigel_taylor@xxxxxxxxxxx)
Date: Wed Jan 24 2001 - 12:48:08 GMT-3
Julie Ann,
Here's the original mesage/layout of the scanerio I posted
to
the group. The lab also specified to only redistribute the OSPF domain
routes into the IGRP domain. I do have "red ospf xx metric x x x x x"
under the IGRP process. Now I do get a 172.16.0.0/16 into the IGRP
domain but I cannont ping all interfaces from the IGRP
domain(another requirement).
Now the lab also specifies "NO Statics". I'm also working on a
OSPF - EIGRP - IGRP redistribution lab. In my case the lab required
you to only use 172.17.59.x for the EIGRP and OSPF domains.
The requirement called for the IGRP domain that is connected to
use 171.68.62.93 w/ a 26 bit mask. Let's try some ASCII art.....
EIGRP(E1)------R3 -------(S1)---(FR, Area 0)---R2 -----R1-(Area 1)
/ \
/ \
IGRP OSPF(Area 2)
(E0) (E2)
/ \
R4 R5
\
(Area 3)
Ok, I've got the EIGRP(E1) using 172.17.59.0/29. The OSPF domain is
using 172.17.59.48/28(S1) and (E2) using 172.17.59.68/30. As I said the
IGRP(E0) is assigned 171.68.62.93 w a /26 on R3's E0 interface. I've
read through the list thread on this but I'm still unable to see a route
to the OSPF from the IGRP domain. I'm so tired at this point can
anyone shed some light on this for me...
TIA
Nigel...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:42 GMT-3