From: Rick Burts (burts@xxxxxxxxxxxxxx)
Date: Wed Jan 24 2001 - 12:43:06 GMT-3
The frame switch configs look relatively straightforward. I am
somewhat puzzled why you set keepalive to 15. Why not just let
it default ?
It might be easier to diagnose the issue if you provided more
information, especially configs from the other routers, better
description of the symptoms, and perhaps output from appropriate
debugs.
Rick
Rick Burts, CCSI CCIE 4615 burts@mentortech.com
Mentor Technologies 240-568-6500 ext 6652
133 National Business Parkway 240-568-6515 fax
Annapolis Junction, Md 20701
Chesapeake Network Solutions has now become Mentor Technologies.
Mentor Technologies is a certified Cisco Training Partner and also
a Cisco Professional Services partner.
We offer most of the Cisco training courses.
We also offer training in Checkpoint Firewall software and
Fore Systems (now Marconi) and MicroMuse.
We also provide network consulting services including
design, management, and problem solving.
We have 22 CCIEs on our staff.
We offer the breakthrough VLAB remote access technology for
access to pratice configuration on real equipment.
On Tue, 23 Jan 2001, Ifeanyi Eze wrote:
> Help please
>
>
>
> Below is the config for the frame switch
> interface serial 0
> no ip address
> encapsulation frame-relay
> frame-relay intf-type dce
> clockrate 64000
> keepalive 15
> frame-relay route 100 interface serial 2 201
> !
> interface serial 1
> no ip address
> encapsulation frame-relay
> frame-relay intf-type dce
> clockrate 64000
> keepalive 15
> frame-relay route 101 interface serial 2 102
> !
> interface serial 2
> encapsulation frame-relay
> frame-relay intf-type dce
> clockrate 64000
> keepalive 15
> frame-relay route 201 interface serial 0 100
> frame-relay route 102 interface serial 1 101
>
> Spicey and Aton works fine through inverse-arp. Prasit s1 maintains up/up
> status but with frame-relay dte, lmi, and pvc down. I have swapped cables,
> interfaces and router to no avail. When I add keepalive 15 on Prasit s1, it
> goes down.
> Any help will be appreciated.
>
> Eze
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:42 GMT-3