From: D. J. Jones (meganac@xxxxxxxx)
Date: Sun Jan 28 2001 - 14:56:47 GMT-3
Are you using the redistribute subnets under the ospf process for igrp?
----- Original Message -----
From: "Nigel Taylor" <nigel_taylor@hotmail.com>
To: "Connary, Julie Ann" <jconnary@cisco.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, January 24, 2001 7:48 AM
Subject: Igrp / ospf and redistribution - revisted
> Julie Ann,
> Here's the original mesage/layout of the scanerio I posted
> to
> the group. The lab also specified to only redistribute the OSPF domain
> routes into the IGRP domain. I do have "red ospf xx metric x x x x
x"
> under the IGRP process. Now I do get a 172.16.0.0/16 into the IGRP
> domain but I cannont ping all interfaces from the IGRP
> domain(another requirement).
>
> Now the lab also specifies "NO Statics". I'm also working on a
> OSPF - EIGRP - IGRP redistribution lab. In my case the lab required
> you to only use 172.17.59.x for the EIGRP and OSPF domains.
> The requirement called for the IGRP domain that is connected to
> use 171.68.62.93 w/ a 26 bit mask. Let's try some ASCII art.....
>
>
> EIGRP(E1)------R3 -------(S1)---(FR, Area 0)---R2 -----R1-(Area 1)
> / \
> / \
> IGRP OSPF(Area 2)
> (E0) (E2)
> / \
> R4 R5
> \
> (Area 3)
>
>
> Ok, I've got the EIGRP(E1) using 172.17.59.0/29. The OSPF domain is
> using 172.17.59.48/28(S1) and (E2) using 172.17.59.68/30. As I said the
> IGRP(E0) is assigned 171.68.62.93 w a /26 on R3's E0 interface. I've
> read through the list thread on this but I'm still unable to see a route
> to the OSPF from the IGRP domain. I'm so tired at this point can
> anyone shed some light on this for me...
>
> TIA
>
> Nigel...
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:46 GMT-3