From: Frank Jimenez (franjime@xxxxxxxxx)
Date: Tue Jan 23 2001 - 01:21:05 GMT-3
1.) I need to go look this up, but I thought that setting priority to 0 can cau
se problems. Rings a bell somewhere but I can't put my finger on it.
2.) Other way is to put ports 2/4 and 2/8 into their own VLAN, then SPAN the wh
ole VLAN to 2/12.
Frank Jimenez, CCIE #5738
franjime@cisco.com
At 08:30 PM 01/22/2001 -0600, you wrote:
>Hi all-
>
>I have two questions concerning Fatkid Lab 350 - Catalyst switching:
>
>1. The lab asks you to configure the switch to be come the root bridge for
>VLAN 2. The solution
>says to use the 'set spantree priority 1 2' command. My question is,
>wouldn't it have been better
>to give it a priority of 0 rather than 1 (to FORCE it to become the root),
>and also, couldn't we have
>used the 'set spantree root 2' command, rather than playing around with
>priorities?
>
>2. The lab asks you set up port 2/12 for SPAN to analyze ports 2/4 and 2/8.
>It mentions that there
>are 2 ways to do this, but only one does exactly what is asked for. The
>author uses the command
>'set span 2/4,2/8 2/12 both'. What's the 'other' way?
>
>Thanks in advance...
>
>Cory
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:40 GMT-3