Token Ring router

From: McCallum, Robert (Robert.McCallum@xxxxxxxxxxxxxxxxxx)
Date: Wed Jan 17 2001 - 13:46:56 GMT-3

Next message: Bernard Omrani: "what is in it for the employer?"
Previous message: Padhu (LFG): "RE: atm ilmi-pvc-discovery"
Next in thread: Yurchenko, Michael: "RE: Token Ring router"
Maybe reply: Yurchenko, Michael: "RE: Token Ring router"
Maybe reply: Merrill, James D. (AIT): "RE: Token Ring router"
Maybe reply: David M Anderson: "Re: Token Ring router"
Maybe reply: David FAHED: "Re: Token Ring router"
Maybe reply: Bill.E.Riddiford@xxxxxx: "Re: Token Ring router"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

Trying to configure up a lab at the moment. I am running into severe
difficulty when trying to connect two routers via a token ring interface.

Scenario = R1 ---token ring0/0(ip 148.100.150.1/24) ---- MAU ----token
ring0/0(ip 148.100.150.2/24) ----R2.

I am getting all sorts of ring errors i.e. need to wait for new
monitor.%TR-3-OPENFAIL: Unit 0, open failed: phase4, ring beaconing

Whether I configure source bridge ring numbers makes no difference.

Has anyone done this before who can point me to a link or in the right
direction. Try not to tell me the answer right out.

Cheers

Robert McCallum

Next message: Bernard Omrani: "what is in it for the employer?"
Previous message: Padhu (LFG): "RE: atm ilmi-pvc-discovery"
Next in thread: Yurchenko, Michael: "RE: Token Ring router"
Maybe reply: Yurchenko, Michael: "RE: Token Ring router"
Maybe reply: Merrill, James D. (AIT): "RE: Token Ring router"
Maybe reply: David M Anderson: "Re: Token Ring router"
Maybe reply: David FAHED: "Re: Token Ring router"
Maybe reply: Bill.E.Riddiford@xxxxxx: "Re: Token Ring router"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:32 GMT-3