Re: Token Ring router

From: David FAHED (dfahed@xxxxxxxxxxxx)
Date: Wed Jan 17 2001 - 16:32:07 GMT-3

• Next message: Rahmlow, Howard F.: "RE: ECP1 in the home-stretch.. A consensus."
• Previous message: Steve Clubb: "RE: policy routing"
• Maybe in reply to: McCallum, Robert: "Token Ring router"
• Next in thread: Bill.E.Riddiford@xxxxxx: "Re: Token Ring router"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Shut your token ring interface put the speed to 4M. Reboot the mau. No shut
of the token ring interface.

"McCallum, Robert" wrote:

> Hello,
>
> Trying to configure up a lab at the moment. I am running into severe
> difficulty when trying to connect two routers via a token ring interface.
>
> Scenario = R1 ---token ring0/0(ip 148.100.150.1/24) ---- MAU ----token
> ring0/0(ip 148.100.150.2/24) ----R2.
>
> I am getting all sorts of ring errors i.e. need to wait for new
> monitor.%TR-3-OPENFAIL: Unit 0, open failed: phase4, ring beaconing
>
> Whether I configure source bridge ring numbers makes no difference.
>
> Has anyone done this before who can point me to a link or in the right
> direction. Try not to tell me the answer right out.
>
> Cheers
>
> Robert McCallum
>

• Next message: Rahmlow, Howard F.: "RE: ECP1 in the home-stretch.. A consensus."
• Previous message: Steve Clubb: "RE: policy routing"
• Maybe in reply to: McCallum, Robert: "Token Ring router"
• Next in thread: Bill.E.Riddiford@xxxxxx: "Re: Token Ring router"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:33 GMT-3