From: Harbir Kohli (harbirk@xxxxxxxxxxxx)
Date: Mon Jan 08 2001 - 20:24:05 GMT-3
Why is this router trying to get config from the network? The config
register is 0x2102
Router(boot)#wr
####[OK]
Router(boot)#reload
Proceed with reload? [confirm]
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 16384 Kbytes of main memory
F3: 14200416+227008+792748 at 0x3000060
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(5), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 25-Oct-00 05:18 by cmong
Image text-base: 0x03071DB0, data-base: 0x00001000
cisco 2500 (68030) processor (revision A) with 16384K/2048K bytes of
memory.
Processor board ID 01063018, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
%Error opening tftp://255.255.255.255/network-confg (Socket error)
%Error opening tftp://255.255.255.255/cisconet.cfg (Socket error)
%Error opening tftp://255.255.255.255/router-confg (Socket error)
%Error opening tftp://255.255.255.255/ciscortr.cfg (Socket error)
Press RETURN to get started!
00:00:08: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:08: %LINK-3-UPDOWN: Interface Serial0, changed state to down
00:00:08: %LINK-3-UPDOWN: Interface Serial1, changed state to down
00:00:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed sta
te to up
00:01:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed sta
te to up
00:01:35: %SYS-5-CONFIG_I: Configured from memory by console
00:01:36: %LINK-5-CHANGED: Interface Serial0, changed state to
administratively
down
00:01:38: %LINK-5-CHANGED: Interface Serial1, changed state to
administratively
down
00:01:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0,
changed state
to down
00:01:41: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1,
changed state
to down
00:02:19: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(5), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by ci
RouTranslsco Systems, Inc.
Compiled Wed 25-Oct-00 05:18 by cmongating "Router"...domain server
(255.255.255
.255)
ter>
Router>
Router>
Router>
Router>
Router>
Router>
Router>
Router>
Router>
Router>
Router>
Router>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(5), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 25-Oct-00 05:18 by cmong
Image text-base: 0x03071DB0, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a),
RELEASE SOFTW
ARE (fc1)
Router uptime is 2 minutes
System returned to ROM by reload
System image file is "flash:c2500-js-l.121-5.bin"
cisco 2500 (68030) processor (revision A) with 16384K/2048K bytes of
memory.
Processor board ID 01063018, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
Router>
CS#2
% 2 is not an open connection
CS#
[Resuming connection 1 to V ... ]
CS#miss
Trying MISS (10.122.95.88, 2012)... Open
Router>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 4000 Software (C4000-DS-M), Version 12.1(5a), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Thu 16-Nov-00 16:18 by cmong
Image text-base: 0x00012000, data-base: 0x00A67B7C
ROM: System Bootstrap, Version 5.2(11a), RELEASE SOFTWARE
ROM: 4000 Bootstrap Software (XX-RXBOOT), Version 10.2(11a), RELEASE
SOFTWARE (f
c1)
Router uptime is 44 minutes
System returned to ROM by power-on
System image file is "flash:c4000-ds-mz.121-5a.bin"
cisco 4000 (68030) processor (revision 0xA0) with 16384K/4096K bytes of
memory.
Processor board ID 5043462
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
8 Serial network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router>
CS#1
[Resuming connection 1 to V ... ]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:24 GMT-3