From: Bernard Dunn (dunn@xxxxxxxxx)
Date: Mon Jan 08 2001 - 20:49:27 GMT-3
If you have cables connected to the router, and there's no startup config,
then the router will try the autoinstall process. Thus the 'service
config' result.
'no service config' global config command should take care of that in
future.
Regards
Bernard.
On Mon, 8 Jan 2001, Harbir Kohli wrote:
> Why is this router trying to get config from the network? The config
> register is 0x2102
> Router(boot)#wr
> ####[OK]
> Router(boot)#reload
> Proceed with reload? [confirm]
>
> System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
> Copyright (c) 1986-1995 by cisco Systems
> 2500 processor with 16384 Kbytes of main memory
>
> F3: 14200416+227008+792748 at 0x3000060
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(5), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2000 by cisco Systems, Inc.
> Compiled Wed 25-Oct-00 05:18 by cmong
> Image text-base: 0x03071DB0, data-base: 0x00001000
>
> cisco 2500 (68030) processor (revision A) with 16384K/2048K bytes of
> memory.
> Processor board ID 01063018, with hardware revision 00000000
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read ONLY)
>
> %Error opening tftp://255.255.255.255/network-confg (Socket error)
> %Error opening tftp://255.255.255.255/cisconet.cfg (Socket error)
> %Error opening tftp://255.255.255.255/router-confg (Socket error)
> %Error opening tftp://255.255.255.255/ciscortr.cfg (Socket error)
>
>
> Press RETURN to get started!
>
>
> 00:00:08: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
> 00:00:08: %LINK-3-UPDOWN: Interface Serial0, changed state to down
> 00:00:08: %LINK-3-UPDOWN: Interface Serial1, changed state to down
> 00:00:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
> changed sta
> te to up
> 00:01:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
> changed sta
> te to up
> 00:01:35: %SYS-5-CONFIG_I: Configured from memory by console
> 00:01:36: %LINK-5-CHANGED: Interface Serial0, changed state to
> administratively
> down
> 00:01:38: %LINK-5-CHANGED: Interface Serial1, changed state to
> administratively
> down
> 00:01:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0,
> changed state
> to down
> 00:01:41: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1,
> changed state
> to down
> 00:02:19: %SYS-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(5), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2000 by ci
> RouTranslsco Systems, Inc.
> Compiled Wed 25-Oct-00 05:18 by cmongating "Router"...domain server
> (255.255.255
> .255)
> ter>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>
> Router>sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(5), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2000 by cisco Systems, Inc.
> Compiled Wed 25-Oct-00 05:18 by cmong
> Image text-base: 0x03071DB0, data-base: 0x00001000
>
> ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
> BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a),
> RELEASE SOFTW
> ARE (fc1)
>
> Router uptime is 2 minutes
> System returned to ROM by reload
> System image file is "flash:c2500-js-l.121-5.bin"
>
> cisco 2500 (68030) processor (revision A) with 16384K/2048K bytes of
> memory.
> Processor board ID 01063018, with hardware revision 00000000
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read ONLY)
>
> Configuration register is 0x2102
>
> Router>
> CS#2
> % 2 is not an open connection
> CS#
> [Resuming connection 1 to V ... ]
>
> CS#miss
> Trying MISS (10.122.95.88, 2012)... Open
>
> Router>sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 4000 Software (C4000-DS-M), Version 12.1(5a), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2000 by cisco Systems, Inc.
> Compiled Thu 16-Nov-00 16:18 by cmong
> Image text-base: 0x00012000, data-base: 0x00A67B7C
>
> ROM: System Bootstrap, Version 5.2(11a), RELEASE SOFTWARE
> ROM: 4000 Bootstrap Software (XX-RXBOOT), Version 10.2(11a), RELEASE
> SOFTWARE (f
> c1)
>
> Router uptime is 44 minutes
> System returned to ROM by power-on
> System image file is "flash:c4000-ds-mz.121-5a.bin"
>
> cisco 4000 (68030) processor (revision 0xA0) with 16384K/4096K bytes of
> memory.
> Processor board ID 5043462
> G.703/E1 software, Version 1.0.
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 Ethernet/IEEE 802.3 interface(s)
> 8 Serial network interface(s)
> 128K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> Router>
> CS#1
> [Resuming connection 1 to V ... ]
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:24 GMT-3