Re: config register settings

From: Jay Hennigan (jay@xxxxxxxx)
Date: Mon Jan 08 2001 - 21:16:29 GMT-3

Next message: Chuck Church: "back to back AUX - Any way to do simulated dialup, dialer lists?"
Previous message: Chuck Church: "RE: CCIE Growth rate.....-> # employed by Cisco?"
Maybe in reply to: Harbir Kohli: "config register settings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

On Mon, 8 Jan 2001, Harbir Kohli wrote:

> Why is this router trying to get config from the network? The config
> register is 0x2102

"no service config" in global configuration mode will stop this insanity.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_r/fr
prt2/frcfgfil.htm#5194 says:

"If the configuration information in NVRAM is invalid or missing, the
service config command is enabled automatically." So, once it gives up
you should be able to get it to go away by just saving a valid config.

> %Error opening tftp://255.255.255.255/network-confg (Socket error)
> %Error opening tftp://255.255.255.255/cisconet.cfg (Socket error)
> %Error opening tftp://255.255.255.255/router-confg (Socket error)
> %Error opening tftp://255.255.255.255/ciscortr.cfg (Socket error)

--
Jay Hennigan  -  Network Administration  -  jay@west.net
NetLojix Communications, Inc.  NASDAQ: NETX  -  http://www.netlojix.com/
WestNet:  Connecting you to the planet.  805 884-6323

Next message: Chuck Church: "back to back AUX - Any way to do simulated dialup, dialer lists?"
Previous message: Chuck Church: "RE: CCIE Growth rate.....-> # employed by Cisco?"
Maybe in reply to: Harbir Kohli: "config register settings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:24 GMT-3