From: Virnoche, Phil (phil.virnoche@xxxxxxxxx)
Date: Mon Jan 08 2001 - 20:28:30 GMT-3
Thanks,............ that fixed it,..............
Philip G. Virnoche
Network Engineer - AT&T Wireless
phone: 425.580.5239
cell: 206.601.3134
"HAM AND EGGS - A day's work for a chicken; A lifetime commitment for a
pig."
-----Original Message-----
From: frank wells [mailto:fwells12@hotmail.com]
Sent: Monday, January 08, 2001 2:18 PM
To: ccielab@groupstudy.com
Subject: Re: CCbootcamp Lab1
Make sure your virtual-links statements are pointing at the interfaces which
are the respective OSPF router ID's. This is how I got it to work! To find
out what the RID's are, do a 'sh ip ospf int <interface type and number>'
>From: "Virnoche, Phil" <phil.virnoche@attws.com>
>Reply-To: "Virnoche, Phil" <phil.virnoche@attws.com>
>To: "CCIE newsgroup (E-mail)" <ccielab@groupstudy.com>
>Subject: CCbootcamp Lab1
>Date: Mon, 8 Jan 2001 13:53:02 -0800
>
>Hello all,...... Long time listener, first time caller...... (For you Tom
>Lykis fans)
>
>I am not getting the Looback neworks to show up in OSPF from R4. I cheated
>and checked the configs against the provided answer configs.
>th output below is from R3...... Any ideas????
>
>
>05:53:35: OSPF: Rcv hello from 10.10.1.1 area 0 from Serial0/0 10.10.1.1
>05:53:35: OSPF: End of hello processing
>05:53:39: OSPF: Rcv hello from 10.44.2.1 area 3 from Serial0/3 10.34.1.2
>05:53:39: OSPF: End of hello processing
>05:53:42: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
>backbone area must be virtual-link but not found from 10.34.1.2, Serial0/3
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:24 GMT-3