From: David M Anderson (dma@xxxxxxxxx)
Date: Mon Jan 08 2001 - 19:46:19 GMT-3
It looks like you need to change the virtual link address on R3. It should be
the highest loopback address of R4 ip address 10.44.2.1 255.255.255.0
I hope that helps
David
At 01:53 PM 01/08/2001 -0800, Virnoche, Phil wrote:
>Hello all,...... Long time listener, first time caller...... (For you Tom
>Lykis fans)
>
>I am not getting the Looback neworks to show up in OSPF from R4. I cheated
>and checked the configs against the provided answer configs.
>th output below is from R3...... Any ideas????
>
>
>05:53:35: OSPF: Rcv hello from 10.10.1.1 area 0 from Serial0/0 10.10.1.1
>05:53:35: OSPF: End of hello processing
>05:53:39: OSPF: Rcv hello from 10.44.2.1 area 3 from Serial0/3 10.34.1.2
>05:53:39: OSPF: End of hello processing
>05:53:42: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
>backbone area must be virtual-link but not found from 10.34.1.2, Serial0/3
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:25 GMT-3