From: David M Anderson (dma@xxxxxxxxx)
Date: Mon Jan 08 2001 - 20:14:57 GMT-3
>
>
>It looks like you need to change the virtual link address on R3. It should be
the highest loopback address of R4 (if that is your router id) ip address 10.4
4.2.1 255.255.255.0
>I hope that helps
>David
>At 01:53 PM 01/08/2001 -0800, Virnoche, Phil wrote:
>>Hello all,...... Long time listener, first time caller...... (For you Tom
>>Lykis fans)
>>
>>I am not getting the Looback neworks to show up in OSPF from R4. I cheated
>>and checked the configs against the provided answer configs.
>>th output below is from R3...... Any ideas????
>>
>>
>>05:53:35: OSPF: Rcv hello from 10.10.1.1 area 0 from Serial0/0 10.10.1.1
>>05:53:35: OSPF: End of hello processing
>>05:53:39: OSPF: Rcv hello from 10.44.2.1 area 3 from Serial0/3 10.34.1.2
>>05:53:39: OSPF: End of hello processing
>>05:53:42: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
>>backbone area must be virtual-link but not found from 10.34.1.2, Serial0/3
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:25 GMT-3