From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Wed Oct 18 2000 - 06:39:31 GMT-3
Make sure you have dialer in-band configured on both ends (this is enabled
on BRI interfaces by default)......
-----Original Message-----
From: Steve McNutt [mailto:lpd@jacksonville.net]
Sent: Wednesday, October 18, 2000 5:50 PM
To: ccielab@groupstudy.com
Cc: bandit@zcore.net
Subject: Async dialer maps
I've been doing some DDR labs using AUX ports (the wife keeps me on a tight
budget), and the dialer maps aren't behaving the way I would expect them to
(i.e. different than ISDN).
If I use a dial string, all is well. if I use a dialer map on one side to
initiate the call, the dynamic dialer map on the other end is NOT created,
so I get encapsulation failures on the return path from the remote router.
If I use a dialer map on both sides, I still get encapsulaion errors on the
return path. This seems odd to me as I verified that PPP is installing a
proper host route pointing at the asynch interface on both ends. If I turn
on authentication everything works like it should.
What gives? is this just AUX port weirdness?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:27 GMT-3