From: Steve McNutt (lpd@xxxxxxxxxxxxxxxx)
Date: Wed Oct 18 2000 - 01:50:05 GMT-3
I've been doing some DDR labs using AUX ports (the wife keeps me on a tight
budget), and the dialer maps aren't behaving the way I would expect them to
(i.e. different than ISDN).
If I use a dial string, all is well. if I use a dialer map on one side to
initiate the call, the dynamic dialer map on the other end is NOT created,
so I get encapsulation failures on the return path from the remote router.
If I use a dialer map on both sides, I still get encapsulaion errors on the
return path. This seems odd to me as I verified that PPP is installing a
proper host route pointing at the asynch interface on both ends. If I turn
on authentication everything works like it should.
What gives? is this just AUX port weirdness?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:27 GMT-3