From: Arthur Davis (senzaart@xxxxxxx)
Date: Tue Oct 17 2000 - 06:16:33 GMT-3
In all of the LANE discussion, I haven't seen how to configure LANE with an
NSAP *other* than that of "atm lecs-address-default." I have configured "atm
lecs-address" on the right interface of the LS1010, and used "lane
auto-config" on the sub-interface of the router, but I still get "ATM0 LECS
cannot register..." errors.
Config:
ls1010:
atm address 47.0091.8100.0000.0050.e205.8501.0000.0c34.b43d.00
atm router pnni
node 1 level 56 lowest
redistribute atm-static
!
!
interface ATM0/0/0
no keepalive
atm lecs-address 47.0091.8100.0000.0050.e205.8501.0000.0c34.b43d.00 1
router:
lane database ccie
name hello server-atm-address 47.0091810000000050E2058501.00000C34B43B.03
default-name hello
!
interface ATM0
no ip address
no ip directed-broadcast
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
lane config auto-config-atm-address
lane config database ccie
!
interface ATM0.3 multipoint
no ip directed-broadcast
lane server-bus ethernet hello
lane client ethernet hello
I have put in static lane commands, i.e.
lane config-atm-address 47.0091810000000050E2058501.00000C34B43D.00
lane server-atm-address 47.0091810000000050E2058501.00000C34B43B.03
lane bus-atm-address 47.0091810000000050E2058501.00000C34B43C.03
but this doens't help.
Art
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:27 GMT-3