From: John Conzone (jkconzone@xxxxxxxx)
Date: Tue Oct 17 2000 - 09:16:54 GMT-3
Arthur, on the main ATM interface that will be your LECS, use the "lane
config config-atm-address (NSAP address of LECS)" command. This binds the
LECS on that interface to that particular NSAP address.
Then on your sub-interface, use the "lane config-atm-address (NSAP
address of LECS)" to bind the LES/BUS and Client on the sub-interface to the
NSAP address of the LECS.
----- Original Message -----
From: "Arthur Davis" <senzaart@usa.net>
To: <ccielab@groupstudy.com>
Sent: Tuesday, October 17, 2000 5:16 AM
Subject: atm lecs-address
> In all of the LANE discussion, I haven't seen how to configure LANE with
an
> NSAP *other* than that of "atm lecs-address-default." I have configured
"atm
> lecs-address" on the right interface of the LS1010, and used "lane
> auto-config" on the sub-interface of the router, but I still get "ATM0
LECS
> cannot register..." errors.
> Config:
>
> ls1010:
> atm address 47.0091.8100.0000.0050.e205.8501.0000.0c34.b43d.00
> atm router pnni
> node 1 level 56 lowest
> redistribute atm-static
> !
> !
> interface ATM0/0/0
> no keepalive
> atm lecs-address 47.0091.8100.0000.0050.e205.8501.0000.0c34.b43d.00 1
>
> router:
> lane database ccie
> name hello server-atm-address
47.0091810000000050E2058501.00000C34B43B.03
> default-name hello
> !
> interface ATM0
> no ip address
> no ip directed-broadcast
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> no atm ilmi-keepalive
> lane config auto-config-atm-address
> lane config database ccie
> !
> interface ATM0.3 multipoint
> no ip directed-broadcast
> lane server-bus ethernet hello
> lane client ethernet hello
>
> I have put in static lane commands, i.e.
> lane config-atm-address 47.0091810000000050E2058501.00000C34B43D.00
> lane server-atm-address 47.0091810000000050E2058501.00000C34B43B.03
> lane bus-atm-address 47.0091810000000050E2058501.00000C34B43C.03
>
> but this doens't help.
>
> Art
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:27 GMT-3