From: Matt Lachberg 3 (Cisco@xxxxxxxxxxxxxx)
Date: Thu Sep 07 2000 - 14:12:04 GMT-3
I can get Lane to work on the atm module in a catalyst, but I can't get
pvc's and svc's and I also don't see the arp server ? command, so I guess I
cannot configure clip. Can anyone confirm or disconfirm.
I tried the atm bind command for the pvc, but I couldn't get unicasts to
work?
R5E1------vlan 30----cat(atm mod)---------0/0/0 ls1010 0/0/1--------atm0R8
Pvc attempt:
Atm module config:
!
interface Ethernet0
!
interface ATM0
atm pvc 2 0 16 ilmi
atm pvc 3 0 5 qsaal
!
interface ATM0.3 multipoint
atm pvc 1 1 33 aal5snap
atm bind pvc vlan 1 30
!
3640
interface ATM0
no ip address
ip directed-broadcast
pvc 0/5 qsaal
!
pvc 0/16 ilmi
!
no atm ilmi-keepalive
!
interface ATM0.3 multipoint
ip address 138.7.58.8 255.255.255.0
ip directed-broadcast
pvc 1/32
protocol ip 138.7.58.4 broadcast
protocol ip 138.7.58.5 broadcast
encapsulation aal5snap
!
router eigrp 1
network 138.7.0.0
R5
!
!
interface Ethernet0/0
ip address 138.7.58.5 255.255.255.0
!
interface Ethernet0/1
no ip address
shutdown
!
router eigrp 1
network 138.7.0.0
ls1010
!
interface ATM0/0/0
no keepalive
!
interface ATM0/0/1
no keepalive
atm pvc 1 33 interface ATM0/0/0 1 32
!
ATM sucks!!!, no wait, my doctor said not to yell, sh*#, cool down, it'll be
ok matt, it'll be ok.......
Matthew Lachberg, CCNP, CCDP, MCSE
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3