From: Earl Aboytes (earl@xxxxxxxxxxxx)
Date: Thu Sep 07 2000 - 02:38:42 GMT-3
I could be wrong here but I think that you are using a lane blade. They can
only do LANE and PVC's. Can anyone confirm this?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Earl Aboytes CCIE #6097
Senior Technical Consultant
GTE Managed Solutions
805-381-8817
earl.aboytes@verizon.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Matt
Lachberg 3
Sent: Thursday, September 07, 2000 10:12 AM
To: ccielab@groupstudy.com
Subject: atm on cat atm module
I can get Lane to work on the atm module in a catalyst, but I can't get
pvc's and svc's and I also don't see the arp server ? command, so I guess I
cannot configure clip. Can anyone confirm or disconfirm.
I tried the atm bind command for the pvc, but I couldn't get unicasts to
work?
R5E1------vlan 30----cat(atm mod)---------0/0/0 ls1010 0/0/1--------atm0R8
Pvc attempt:
Atm module config:
!
interface Ethernet0
!
interface ATM0
atm pvc 2 0 16 ilmi
atm pvc 3 0 5 qsaal
!
interface ATM0.3 multipoint
atm pvc 1 1 33 aal5snap
atm bind pvc vlan 1 30
!
3640
interface ATM0
no ip address
ip directed-broadcast
pvc 0/5 qsaal
!
pvc 0/16 ilmi
!
no atm ilmi-keepalive
!
interface ATM0.3 multipoint
ip address 138.7.58.8 255.255.255.0
ip directed-broadcast
pvc 1/32
protocol ip 138.7.58.4 broadcast
protocol ip 138.7.58.5 broadcast
encapsulation aal5snap
!
router eigrp 1
network 138.7.0.0
R5
!
!
interface Ethernet0/0
ip address 138.7.58.5 255.255.255.0
!
interface Ethernet0/1
no ip address
shutdown
!
router eigrp 1
network 138.7.0.0
ls1010
!
interface ATM0/0/0
no keepalive
!
interface ATM0/0/1
no keepalive
atm pvc 1 33 interface ATM0/0/0 1 32
!
ATM sucks!!!, no wait, my doctor said not to yell, sh*#, cool down, it'll be
ok matt, it'll be ok.......
Matthew Lachberg, CCNP, CCDP, MCSE
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:53 GMT-3